意思翻译
表面粗（糙）度，表面光洁度
[机][气象]表面粗糙度；表面光洁度
相关相似surface condensers───表面冷凝器
surface noises───表面噪声
surface runoff───[水文]地表径流；地面迳流
surface workers───地面工人
fracture toughness───[力]断裂韧性
facetiousness───n.滑稽；玩笑
orange roughies───橙色粗饲料
双语场合用语Surface roughness codes and their labeling.───表面粗糙度的代号及其标注。
Understand the basic conception of form position tolerance and surface roughness.───了解形差与表面粗糙度基本概念.
This model provides technical support for surface roughness prediction model in virtual NC milling.───该模型为虚拟数控铣削表面粗糙度预测的建模提供了理论依据.
The surface roughness increases first and then decreases as surface density increase.───表面粗糙度在两个系统中都是随著表面密度先升后降.
Although cut tobacco, but look darker color, surface roughness.───烟丝虽显得黄光, 但色泽较黑 、 黑不天粗劣.
Understand the basic conception of form and position tolerance and surface roughness.───了解形位公差与表面粗糙度基本概念.
It was also found the surface roughness in gas is better that in emulsion.───同时发现,在相同加工条件下,气中加工的粗糙度普遍优于液中加工.
Therefore, surface roughness measuring technique takes a very important place in engineering and technological research.───因此, 表面粗糙度测量技术在工程技术研究中占有非常重要的地位.
At the beginning of machining, the metal is removed rapidly and the surface roughness descends quickly.───试验还表明在加工初期具有较高的金属去除率,表面粗糙度也下降较快.
The surface roughness Rz of 0.07 um can be obtained for the stainless steel spheres.───加工不锈钢球面时,可获得R_0.07μ的粗糙度.
Annual variation of surface roughness obtained from wind profile measurements.───根据风廓线测量获得的地面粗糙度的年度变化.
Friction increases with increasing fiber surface roughness in the boundary and semiboundary.───在边界和半边界区内,摩擦随纤维表面粗糙度的增加而增加.
The contribution of the guide surface roughness overshadows that of the fiber surface roughness.───导纱杆表面粗糙度的作用超过纤维表面的粗糙度.
Variations in surface roughness of both guide and fiber surfaces have a marked effect on friction.───导纱器和纤维表面粗糙度的变动,对摩擦力都有显著影响.
Effects of different preparation procedures on abutment surface roughness.───不同预备程序对基牙表面粗糙度的影响。
Only in surface roughness of the finishing time is important.───表面粗糙度只有在精加工的时候才是重要。
For a good bond, an adhesive must counteract the effect of surface roughness and boundary layers.───为了取得很好的粘结, 粘结剂必须能克服表面粗糙和边界层的反应.
Results show that this process can reach surface roughness with angstrom dimension.───结果表明,这种抛光工艺能获得原子级的超光滑表面.
英语场合用语The results demonstrate that when surface roughness increases, the load capacity and the frictional force of surface asperities increase, but the oil film-thickness ratio decreases.
The effects of polarization, surface roughness and physical temperature on surface apparent temperature are investigated.
The contribution of the guide surface roughness overshadows that of the fiber surface roughness.
The surface roughness increases first and then decreases as surface density increase.
Both dimensional accuracy and surface roughness of the metal handicraft in ceramic mold meet technological requirement.
Methods The surface roughness of 24 teeth treated with air-flow was observed under light wave interference microscope. Then the effect of prophylaxis paste on these surface were analyzed.
A - time surface roughness measurement system using fibre optics in process is in this paper.
Changes in surface roughness after gas cluster ion bombardments have been measured by an atomic force microscope.
Surface roughness is one of the significant machining characteristics in the finish cut of WEDM.
延伸推荐- surface pen
- surface water
- surface go
- surface roughness
- surface scan
- surface mail
- surface area
- surface temp
- surface book
